Audac LIM012 Balanced Stereo Limiter - Black

The LIM012 balanced stereo limiter is a small size, easy to use, device that can be used for limiting the signal coming from an input device such as a mix-table, microphone, etc… that is then send to a (power) amplifier. Limiting this input signal will not only protect your PA system, but also enables you to comply to restrictions by law. When the input signal of this input device exceeds the desired level, the LIM012 will then attenuate the output signal sent to the output device in such a way that it will again reach the desired level. This level can be set by turning the Limit switch and can be limited at 6 different levels: 0 dBV, -6 dBV, -12 dBV, -18 dBV, -24 dBV and -30 dBV. At the bottom the green LED’s indicate the set Limit level. When the output signal is exceeding the desired Level, attenuation will take place and the red LED will indicate the location of the Limitation (Left or Right). The LIM012 balanced Stereo Limiter has 2 channels that can work separately whereby it can be used as a stereo, or 2 x mono limiter. The LIM012 needs to be connected to a 24 DC power source. The PSD242 Power supply is included. SYSTEM SPECIFICATIONS: Input impedance: 20 kOhm Output impedance: 20 kOhm Input level: -10 dB Output level: -10 dB Level range: 0 dB to -30 dB Frequency response: 20 Hz – 20 kHz Signal to noise ratio: < -90 dB THD+N: <0,15% Power supply: 24 V DC Digital control: RS485 PRODUCT FEATURES: Dimensions (Width x Height x Depht): 44 x 110 x 160 mm Weight net: 470 g Construction: Aluminium Connector: 2 x XLR F / 2 x XLR M Colour: Black Accessories: PSD242 Power supply